| Customization: | Available |
|---|---|
| Material: | Steel |
| Type: | Fixed |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Muti-function Q345 Cuplock Scaffolding for Building Construction
Cuplock scaffolding is a mature system. It mainly composes of standard, ledger, brace, plank and so on.
Cuplock node is revolutionary, so makes it faster and easier erection than any other scaffolding. It uses the "Cup"
and "Blade" to lock the vertical and horizontal together by rotating the top cup.
On the standard each top cup has a limited position pin. This small part determines whether the ledger can be
locked tightly. It must be at right place, not too up or too down.
Tube diameter: 48.3mm, thickness: 3.2mm, Steel Grade: Q345, Surface treatment: Hot dip galvanized
| Product | Length | ||
| Code | Description | Inches | Meters |
| CLS500 | 1 Cup standard w/spigot 1′-8″ | 19.69 | 0.5 |
| CLS1000 | 2 Cup standard w/spigot 3′-3″ | 39.37 | 1.0 |
| CLS1500 | 3 Cup standard w/spigot 4′-11″ | 59.06 | 1.5 |
| CLS2000 | 4 Cup standard w/spigot 6′-6″ | 78.74 | 2.0 |
| CLS2500 | 5 Cup standard w/spigot 8′-2″ | 98.43 | 2.5 |
| CLS3000 | 6 Cup standard w/spigot 9′-10″ | 118.11 | 3.0 |
Tube diameter: 48.3mm, thickness: 3.2mm, Steel Grade: Q345, Surface treatment: Hot dip galvanized
| Product | Length | ||
| Code | Description | Inches | Meters |
| CLL787 | 2′-7″ Ledger | 31 | 0.787 |
| CLL914 | 3′ Ledger | 36 | 0.914 |
| CLL1066 | 3′-6″ Ledger | 42 | 1.066 |
| CLL1219 | 4′ Ledger | 48 | 1.219 |
| CLL1524 | 5′ Ledger | 60 | 1.524 |
| CLL1828 | 6′ Ledger | 72 | 1.828 |
| CLL2133 | 7′ Ledger | 84 | 2.133 |
| CLL2438 | 8′ Ledger | 96 | 2.438 |
| CLL2743 | 9′ Ledger | 108 | 2.743 |
| CLL3048 | 10′ Ledger | 120 | 3.048 |
Tube diameter: 48.3mm, thickness: 2.5mm, Steel Grade: Q235, Surface treatment: Hot dip galvanized
| Product | Width | Length | |||
| code | description | Inches | Meters | Inches | Meters |
| CLDB2342 | 4′ Diagonal Brace | 48 | 1.219 | 78.74 | 2 |
| CLDB2514 | 5′ Diagonal Brace | 60 | 1.524 | 78.74 | 2 |
| CLDB2693 | 5′-11″ Diagonal Brace | 71 | 1.803 | 78.74 | 2 |
| CLDB2924 | 7′ Diagonal Brace | 84 | 2.133 | 78.74 | 2 |
| CLDB3153 | 8′ Diagonal Brace | 96 | 2.438 | 78.74 | 2 |
| CLDB3193 | 8′-2″ Diagonal Brace | 98 | 2.489 | 78.74 | 2 |
| CLDB3394 | 9′ Diagonal Brace | 108 | 2.743 | 78.74 | 2 |
| CLDB3645 | 10′ Diagonal Brace | 120 | 3.048 | 78.74 | 2 |
Tube diameter: 48.3mm, thickness: 3.2mm, Steel Grade: Q235, Surface treatment: Hot dip galvanized
| Product | Length | ||
| Code | Description | Inches | Meters |
| CLT2133 | 7′ Truss | 84 | 2.133 |
| CLT2438 | 8′ Truss | 96 | 2.438 |
| CLT2743 | 9′ Truss | 108 | 2.743 |
| CLT3048 | 10′ Truss | 120 | 3.048 |
| CLT3658 | 12′ Truss | 144 | 3.658 |
| CLT4267 | 14′ Truss | 168 | 4.267 |
| CLT4877 | 16′ Truss | 192 | 4.877 |
| CLT5486 | 18′ Truss | 216 | 5.486 |
| CLT6096 | 20′ Truss | 240 | 6.096 |
| CLT6401 | 21′ Truss | 252 | 6.401 |
Tube diameter: 48.3mm, thickness: 3.2mm, Steel Grade: Q235, Surface treatment: Hot dip galvanized
| Product | Length | ||
| Code | Description | Inches | Meters |
| CLBB360 | One Board | 11.4 | 0.29 |
| CLBB390 | Two Board | 22.2 | 0.57 |
| CLBB730 | Three Board | 31.3 | 0.8 |
| Product | Length | ||
| Code | Description | Inches | Meters |
| CLTB914 | 3′ Transom Beam | 36 | 0.914 |
| CLTB1219 | 4′ Transom Beam | 48 | 1.219 |
){kind=link}